Warm Audio WA-14 Large-diaphragm Condenser Microphone

Their acclaimed compressors and preamps have famously upset the pro audio price/performance ratio. When Warm Audio turned their attention to microphones, they set high targets: the most iconic large-diaphragm FET condenser mics in history. Behold the WA-14. It’s based on a studio classic. Flash back to any top recording facility in the late 1970s. You’ll see its venerable progenitor everywhere. On pianos, acoustic guitars, overheads, vocals, brass, percussion — you name it. Warm Audio closely followed this timeless design when they engineered their own LK-12-B-60V Lens Kondensator for the WA-14. Stellar performance, top-shelf parts, and amazing value: that’s the Warm formula — and the WA-14 nails it again.

4 Items sold in last 3 minutes

Out of stock

5 People watching this product now!

The Warm Audio WA-12-B-60V is an all-brass, edge-terminated capsule that captures all the smoothness, rich top end, and warm vintage sonics of the original CK12 capsule. The WA-12-B-60V uses a variant CEK-12 back plate as a basis, which overcomes manufacturing limitations of the original CK12 capsule. The o-ring and housing of the WA-12-B-60V are all made from brass (no teflon parts), and the diaphragm is 24k gold sputtered 6 micron, NOS PET film (mylar). The end result is a very consistent, reliable capsule which matches the frequency response and tonality of the classic 1970’s classic capsule.

The WA (Warm Audio) brand of capsule is the result of several years of research, a lifetime of listening, and a passion for great sound. Above all else, Warm Audio capsules came from the desire to give customers far more quality/value than what they are used to getting in an affordable microphone. Every Warm Audio capsule is made in the same small assembly house in a clean-room environment, and packaged in its own protective jewel case until the moment it is loaded into the microphone.

Every capsule visually inspected and electrically tested for imperfections. Every capsule is also made with all brass parts (no teflon or other cost saving material), and is carefully skinned from the same supply of high purity NOS Mylar (PET film). We are confident that you will be just as pleased with our microphone capsules as we are to offer them, and that they will give you a lifetime of great recordings and enjoyment.