Focal Trio6 Be

Focal Trio6 Be at a Glance:

• It’s also a compatible 2-way reference
• Optimized bass response in both modes
• Hear the advantages of Focal’s Beryllium inverted-dome tweeter
• W composite sandwich cone helps optimize frequency response

It’s also a 2-way reference

As a two-way monitor, the Focal Trio6 Be employs only its 5″ woofer and tweeter, and limits frequencies to between 90Hz and 20kHz. This configuration gives you the ideal compromise when checking the quality of your mix for playback systems with limited frequency response, such as televisions, computers, car radios, or portable speaker systems. Albeit less extended, the frequency response curve of the two-way configuration is identical to the Trio6 Be’s 3-way curve, giving you a perfect instant comparison that preserves the stereo spectrum. A footswitch (available separately) lets you toggle configurations remotely from your listening position. Focusing on the critical middle frequency range is an important key to a good mix that translates to the world outside your studio.

Optimized bass response in both modes

In the Focal Trio6 Be, two front-facing bass-reflex ports ensure that the 5″ W composite sandwich cone woofer performs identically in both 2-way and 3-way modes. The 8″ W composite sandwich cone subwoofer has its own large port integrated into the front baffle. Without concerns of rear-port saturation, front ports make it easy to position your monitors near a wall while maintaining superior low-frequency linearity. What’s more, the 8″ sub’s large front port gives you consistent bass performance at any SPL.

Hear the advantages of Focal’s Beryllium inverted-dome tweeter

A Focal hallmark is the inverted-dome tweeter – and it’s a big part of the magic behind the Trio6 Be’s amazing performance. The particular advantage of the inverted dome is that it optimizes the mechanical coupling between the voice coil and the dome. As the voice coil is fixed at mid-height on the dome, it can uniformly move the Trio6 Be’s entire cone surface. This design inherently offers high efficiency, precision, and energy, all resulting in an extremely precise soundstage. Add to that the use of Beryllium for the Trio6 Be’s dome – a material noted for its incredible rigidity – and you’ve got a speaker that, with near-perfect linearity, extends all the way up to 40kHz.

W composite sandwich cone helps optimize frequency response

The Trio6 Be takes advantage of Focal’s W composite sandwich cone for both its 5″ woofer and 8″ subwoofer. The unique characteristics of the cone permit optimization of the frequency response curve, thanks to the total control of three key parameters: lightness, rigidity, and damping. The sound is amazingly transparent, exhibits excellent phase response, and has extremely low distortion. Further, the 5″ woofer lives in its own isolated chamber within the cabinet; this prevents sympathetic vibration of the other drivers while optimizing the woofer’s acoustic performance.

Focal Trio6 Be Features:

• 3-way, 2-way: two monitors in one with remote switching
• Focus (2-way) mode is an ideal way to hear your mix on a bandwidth-limited reference
• Uncompromised dynamics, linearity, and wide dispersion
• Beryllium inverted dome tweeter: state-of-the-art speaker design and material
• W composite sandwich cone woofer and sub for neutral, distortion-free sound
• Rotating baffle facilitates both horizontal and vertical orientation in your studio
• LF and HF shelving, 160Hz EQ, for simplified room integration
• Bespoke tri-amplification for effortless performance:
  • 8″ subwoofer: 200W Class G
  • 5″ woofer: 150W Class G
  • 1″ tweeter: 100W Class AB
• High-SPL design (115dB peak @ 1m) accommodates all musical styles
• Remote pedal jack (pedal not supplied) for toggling Focus mode
• Most 1-button guitar amp footswitches are compatible

Tech Specs

• Powered:Yes
• Power Configuration:Tri-amped
• LF Driver Size:8″ (Low), 5″ (Mid)
• LF Driver Type:Composite sandwich cone woofer
• HF Driver Size:1″
• HF Driver Type:Inverted Dome
• LF Driver Power Amp:200W (Low), 150W (Mid)
• HF Driver Power Amp:100W
• Total Power:450W
• Frequency Response:35Hz-40kHz
• Maximum Peak SPL:115 dB (3-way), 105 dB (2-way)
• Input Types:1 x XLR, 1 x 1/4″
• Output Types:1 x 1/4″
• Enclosure Type:Ported
• Height:20.5″
• Width:10.94″
• Depth:14.19″
• Weight:44 lbs.
• Manufacturer Part Number:#FOPRO-TRIO6BE